![]() ![]() all devices must be linked with the modem before starting the Insteon binding. The binding does not support linking new devices on the fly, i.e. The binding also supports sending and receiving of legacy X10 messages. Relevant messages from the Insteon network (like notifications about switches being toggled) are picked up by the modem and converted to openHAB status updates by the binding. The binding translates openHAB commands into Insteon messages and sends them on the Insteon network. The modem can also be connected via TCP (such as ser2net. The Insteon PowerLinc Controller (Model 2414U) is not supported since it is a PLC not a PLM. The modem can be connected to the openHAB server either via a serial port (Model 2413S) or a USB port (Model 2413U. This binding provides access to the Insteon network by means of either an Insteon PowerLinc Modem (PLM), a legacy Insteon Hub 2242-222 or the current 2245-222 Insteon Hub. More about Insteon can be found on Wikipedia (opens new window). Insteon devices send messages either via the power line, or by means of radio frequency (RF) waves, or both (dual-band.Ī considerable number of Insteon compatible devices such as switchable relays, thermostats, sensors etc are available. Insteon is a home area networking technology developed primarily for connecting light switches and loads. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |